| |
 |
Filters |
| |
|
|
 |
|
| |
| Shimokote 9 / Hardener 61 |
| Shimokote 9 is a filled epoxy resin. Hardener 61 is an aliphatic polyamine. The system has a short pot life and curing time at room temperature. The fillers in Shimokote 9 are non-abrasive, hence the system can be applied by dosing machines. Curing can be carried out at an ambient temperature. Hardness : Shore D-90 HDT 62. |
 |
|
|
|
|
| |
| Shipal 60 / LV / Hardener IS-32 |
| This system is used as an adhesive for filters. The two component room temperature curing system gives flexible cured product, having good adhesive strength and water resistant properties. |
|
|
|
|
| |
| Shimocast 101 / Hardener IS-32 |
| Two component, room temperature curing PUR system containing fillers. Cured mass is flexible. Shore A-75 hardness. Good adhesion to metallic substrates. Low shrinkage. |
|
|
|
|
| |
|
 |
|
Adhesives and Sealants |
|
|
|
| |
|
| |
| Shimorez 400 / Hardener SH-25 |
| Shimorez 400 is viscous unmodified epoxy resin. Hardner SH-25 is viscous liquid based on aliphatic polyamines. The system is used in formulation of Epoxy Sealants, which cures into hard mass at ambient temperature. |
|
|
| |
|
| |
| Shimorez 401 / Hardener SH-25 |
| Shimorez 401 is flexible epoxy resin containing no diluents. Hardner SH-25 is viscous liquid based on aliphatic polyamines. The system is used in formulation of Epoxy Sealants, which cures into tough resilient mass at ambient temperature. |
|
|
|
|
| |
| Shimorez-401 / Hardener 153 |
| Shimotite is an excellent structural adhesive. It has adequate pot life and the cured mass is tough and hard. Shimorez-401 is a viscous epoxy resin and Hardener 153 is a specially formulated Polyamide amine. |
|
|
|
| |
|
