| |
 |
Repair of Concrete Structures |
| |
|
|
 |
|
| |
| Shimorez 401 / Hardener 43F |
| Shimorez 401 is flexible epoxy resin containing no external diluents. Hardner 43F is polyamide amine. System cures at ambient temperature. Cured product is tough and resilient. |
 |
|
|
|
|
| |
| Shimorez-404C / Hardener 61 |
| This is room temperature curing system. Shimorez-404C is a low viscous epoxy resin. It offers crack free castings when cured with Hardener 61. Also the impact resistance is good. It has a short curing time. |
|
|
|
|
| |
| Shimorez-404C / Hardener 43F |
| This is a room temperature curing system. Shimorez-404C is a low viscous epoxy resin. Hardener 43F is an amino compound. The system offers long pot life and the cured mass is flexible with improved impact strength and heat-shock resistance properties. |
|
|
|
|
| |
|
Grouting |
|
 |
|
|
| |
| Shimorez 401 / Hardener 43F |
| Shimorez 401 is flexible epoxy resin. It does not contain external plasticizer or diluent. Hardner 43F is polyamide amine. System cures at room temperature. Cured products are tough and resilient. |
|
|
|
|
| |
| Shimokote 9 / Hardener 43F |
| Shimokote 9 is a filled epoxy resin. Hardener 43F is a low viscosity polyamide amine. The system has a long pot life and the cured product is hard and tough. The system contains non-abrasive fillers. Hence, it is suitable for application with Dosing machines. Curing is carried out at room temperature. Hardness : Shore D-75 HDT 50. |
|
|
|
|
| |
| Shimokote 10 / Hardener 43F |
| Shimokote 10 is a flexible epoxy resin. It contains non-abrasive fillers. Hardener 43F is a low viscous polyamide amine. Cured product of the system is flexible. The system has a long pot life at room temperature. The system is recommended for potting of pressure sensitive electronic assemblies. Hardness : Shore A-80 HDT is lower than room temperature. |
|
|
|
|
| |
|
Corrosion Resistance Coatings |
|
|
|
|
|
| |
| Hardener SH-52 (Development Product) |
| Hardner SH-52 is based on Phenyl alkyl amines. It can be cured with conventional epoxy resins at room temperature. The system has excellent corrosion resistance; hence highly suitable for underwater concrete structures, tanks, etc. |
|
|
|
|
| |
|
