| |
 |
Transformers and Coils |
| |
|
|
 |
|
| |
| Shimorez-400 / Hardener SH-95 / Accelerator A-01 |
| This is a heat curing epoxy resin system. Shimorez-400 does not contain any external diluents. Hardener SH-95 is a liquid anhydride and Accelerator A-01 is an amino compound. The system can be used with inorganic fillers. The cured product has glass transition temperature of approx. 105oC. The system is recommended for H.T. transformers, insulators and switch gear components. |
 |
|
|
|
|
| |
| Shimorez 401 / Hardener SH-95 / Accelerator A-01 |
| This is a heat curing system. Shimorez-401 does not contain any external diluents. Hardener SH-95 is a liquid anhydride and Accelerator A-01 is an amino compound. The cured product is crack resistant, has improved impact resistance and thermal shock resistance properties. Glass transition temperature is approx. 90oC. |
|
|
|
|
| |
| Shimorez-402/M / Hardener 61 |
| This is a room temperature curing system. Shimorez-402/M is a low viscous epoxy resin. Hardener 61 is a Polyamine. The system has short curing time. |
|
|
|
|
| |
| Shimorez-404C / Hardener 61 |
| This is room temperature curing system. Shimorez-404C is a low viscous epoxy resin. It offers crack free castings when cured with Hardener 61. Also the impact resistance is good. It has a short curing time. |
|
|
|
|
|
|
| |
| Shipal 40 / Hardener IS-32 |
| Two component PUR casting system, containing fillers. It cures at ambient temperatures with low exotherm. Cured mass is tough-flexible, Shore D-70 hardness. Glass transition temperatures is approx. 55oC. Cured product has excellent thermal shock resistance and improved impact resistant strength. |
|
|
| |
|
| |
| Shimocast 101 / Hardener IS-32 |
| Two component, room temperature curing PUR system containing fillers. Cured mass is flexible. Shore A-75 hardness. Good adhesion to metallic substrates. Low shrinkage. |
|
|
|
|
| |
|
Insulators and Switchgear Components |
|
 |
|
|
|
| |
| Shimorez-400 / Hardener SH-95 / Accelerator A-01 |
| This is a heat curing epoxy resin system. Shimorez-400 does not contain any external diluents. Hardener SH-95 is a liquid anhydride and Accelerator A-01 is an amino compound. The system can be used with inorganic fillers. The cured product has glass transition temperature of approx. 105oC. The system is recommended for H.T. transformers, insulators and switch gear components. |
|
|
|
|
| |
| Shimorez 401 / Hardener SH-95 / Accelerator A-01 |
| This is a heat curing system. Shimorez-401 does not contain any external diluents. Hardener SH-95 is a liquid anhydride and Accelerator A-01 is an amino compound. The cured product is crack resistant, has improved impact resistance and thermal shock resistance properties. Glass transition temperature is approx. 90oC. |
|
|
|
|
| |
| Shimorez-402/M / Hardener 61 |
| This is a room temperature curing system. Shimorez-402/M is a low viscous epoxy resin. Hardener 61 is a Polyamine. The system has short curing time. |
|
|
|
|
|
|
| |
| Shipal 40 / Hardener IS-32 |
| Two component PUR casting system, containing fillers. It cures at ambient temperatures with low exotherm. Cured mass is tough-flexible, Shore D-70 hardness. Glass transition temperatures is approx. 55oC. Cured product has excellent thermal shock resistance and improved impact resistant strength. |
|
|
|
|
| |
| Shipal 50 / Hardener IS-32 |
| Two component PUR casting system, containing fillers. It cures at ambient temperature. With low exotherm, cured mass is hard. Shore D-85 hardness and glass transition temperature approx. 70oC. Cured product has excellent resistance to transformer oil. |
|
|
|
|
| |
|
Cable Joints and Terminations |
|
|
|
|
|
| |
| Shimorez 101/M2 / Hardener IS-32 |
| Two component room temperature curing PUR system, containing heavy fillers loading to improve thermal conductivity. The cured product is flexible shore A-75 hardness. Low exotherm during curing. Low cost system. |
|
|
|
|
| |
| Shipal 40 / Hardener IS-32 |
| Two component PUR casting system, containing fillers. It cures at ambient temperatures with low exotherm. Cured mass is tough-flexible, Shore D-70 hardness. Glass transition temperatures is approx. 55oC. Cured product has excellent thermal shock resistance and improved impact resistant strength. |
|
|
|
|
| |
| Shimokote 9 / Hardener 43 |
| Shimokote 9 is a filled epoxy resin. Hardener 43 is a low viscosity polyamide amine. The system has a long pot life and the cured product is hard and tough. The system contains non-abrasive fillers. Hence, it is suitable for application with Dosing machines. Curing is carried out at room temperature. Hardness : Shore D-75 HDT 50. |
|
|
|
|
| |
|
Capacitors |
|
|
|
| |
|
| Shimokote 9 / Hardener SH-34 |
| Shimokote 9 is a filled epoxy resin. Hardener 34 is aromatic polyamine in flakes form. It is heat curing system. Glass transition temperature approx. 100oC |
|
|
|
|
| |
| Shimokote 9 / Hardener 43 |
| Shimokote 9 is a filled epoxy resin. Hardener 43 is a low viscosity polyamide amine. The system has a long pot life and the cured product is hard and tough. The system contains non-abrasive fillers. Hence, it is suitable for application with Dosing machines. Curing is carried out at room temperature. Hardness : Shore D-75 HDT 50. |
|
|
|
|
| |
| Shipal 40 / Hardener IS-32 |
| Two component PUR casting system, containing fillers. It cures at ambient temperatures with low exotherm. Cured mass is tough-flexible, Shore D-70 hardness. Glass transition temperatures is approx. 55oC. Cured product has excellent thermal shock resistance and improved impact resistant strength. |
|
|
|
|
| |
| Shimocast 101 / Hardener IS-32 |
| Two component, room temperature curing PUR system containing fillers. Cured mass is flexible. Shore A-75 hardness. Good adhesion to metallic substrates. Low shrinkage. |
|
|
|
|
| |
|
Laminated and Filament Wound Products |
|
|
|
|
|
| |
| Shimorez-400 / Hardener SH-95 / Accelerator A-01 |
| This is a heat curing epoxy resin system. Shimorez-400 does not contain any external diluents. Hardener SH-95 is a liquid anhydride and Accelerator A-01 is an amino compound. The system can be used with inorganic fillers. The cured product has glass transition temperature of approx. 105oC. The system is recommended for H.T. transformers, insulators switch gear and glass filament wound components. |
|
|
|
|
| |
| Shimorez 400 / Hardener SH-34 |
| This is a heat curing system. Hardener SH-34 is supplied in flake form. Shimorez-400 is a viscous liquid and does not contain any external diluents. The cured product has glass transition temperature of approx. 110oC. The system is recommended for casting of load bearing insulators, switch gear ,glass filament wound components etc. |
|
|
|
|
| |
| Shimorez-404C / Hardener 61 |
| This is room temperature curing system. Shimorez-404C is a low viscous epoxy resin. It offers crack free castings when cured with Hardener 61. Also the impact resistance is good. It has a short curing time. |
|
|
|
| |
|
